Back on top
Control your fences from anywhere
Log in to the cloud
We are looking for partners
We are looking for sales offices in the European countries
Contact us

Functions and characteristics of fencee energy DUO RF EDX energizers

Combined operation

Power supply is possible from a 230 V using an adapter or from a conventional 12 V battery, also usable as a backup supply.

Cloud connection

Device can be connected to the Cloud and remotely controlled using a mobile phone via the fencee Cloud application or the web interface.

Control from phone

Control and monitor all devices using the fencee Cloud mobile application.

Online information

Thanks to the connection to the Cloud, you have always online current information about all connected devices online.

Alarm signalling

Device signals alarms that alert you audibly. Especially for a drop in voltage on the fence below the set level (normally 3 kV), but also a warning of a low battery condition of the device or a signal loss reporting.

LCD Display

The large, easy to read graphic LCD display shows all important information. Thanks to the adjustable contrast of the display, it is easy to read from a distance even in direct sunlight.

Reduced output

Yellow terminal for reduced output. You can use the reduced output for a smaller fence or for connection to the lowest wire. In the case of vegetation growth, only reduced performance will be affected and there will be no significant loss of tension on the fence.

Earthing measurement

Green terminal for measuring earthing quality.

No SIM CARD needed

Devices use free RF radio technology (radio frequency). No SIM CARD is required for operation. There are no additional costs for the operation of the device.

Power Switching

Manual switching between high and low power. Optional for the user to save battery when needed.

Time delay 50 s

Increase power to maximum power for safety reasons. 

Extreme power

Energizers of this series have a very strong output up to 15 J. They are suitable for places where you need to ensure maximum reliability.

LED Bargraph

Visually gives information about the state of the fence.

Battery management

Checking and managing the battery status.

ST transformer

Special ST transformer, extra high voltage with long term protection.

LED diodes

Modern LED diodes with BrightLight technology offering high luminosity.

Smart Control

Smart Control technology provides microprocessor-controlled operation and optimal performance of the energizer.

Saves time

The end of constant walking. You can see the status of the fence on your phone.

SafeShock

The SafeShock technology ensures maximum safety for your animals. Specially shaped impulse curve.

Basic specifications of fencee energy DUO RF EDX energizers

Range of smart high-performing fencee energizers with output power 8 - 15 J and a possible installation length up to 120 km

Energizers of this series are suitable for long fences burdened with vegetation. Applicable for all types of larger or more resistant animals like cattle, sheep,  at the same time it protects against pests such as wild pigs or wild animals. They are also suitable for young animals (calves, foals), thanks to the yellow terminal with reduced energy.

The energizers can be controlled remotely by a mobile phone via the fencee Cloud application or from the web interface.

General characteristics:

  • Possibility to connect to the Cloud
  • Combined energizers with connection to 230 Vor power supply from standard battery 12 V
  • Battery power is suitable in places without electricity or as a backup source
  • Energizers have microprocessor-controlled operation with the possibility of switching the output energy to 50% or 100%. This function is useful to save battery power if needed
  • On the large LCD display you have clear information about important values on the fence
  • Using the setting buttons, you can easily set and check all the necessary parameters

At the output of the energizer is a black earthing terminal, a red terminal for attachment of fences, a yellow terminal for connecting fence with permanently reduced energy and a green terminal for measuring the quality of the earthing.

How to use a earthing quality terminal and  reduced output terminal

The basic range of radio communication (RF) between the energizer and the gateway is up to 10 km in normal terrain and buildings. In difficult, eg hilly terrain, the range is shortened, on the contrary, in open space it can be even longer. An external antenna can be used to increase the signal transmission range between the energizer and the gateway, thus increasing the communication range up to a distance of 30 km.

  • Powerful Smart electric fence energizers
  • Remote control and monitoring electric fence by mobile phone
  • Life with Smart Farm - fencee Cloud app

Control from phone

Control enegizers via mobile phone or web interface and get constant control over fences from virtually anywhere in the world.

  • Monitor and set values
  • Online notifications to phone and email in case of a problem
Control from phone
Connect energizer to the fencee Cloud

Connect energizer to the fencee Cloud

fencee Cloud is a secure place on the Internet through which all necessary devices communicates with each other.

  • Connect all RF fencee devices to the Cloud and control the fence from practically anywhere in the world

Find out more about fencee Cloud.

Reduced output - yellow terminal

Yellow terminal with reduced output.

  • 1. Possibility of connection separately to the bottom wire, where vegetation is expected to grow. If overgrowth begins to occur, it will only affect reduced output and there will be no loss of voltage on fence
  • 2. Output can also be used for a second smaller fence in which smaller and younger animals move
Reduced output - yellow clip
Earthing measurement - green clip

Earthing measurement - green terminal

Green terminal for control earthing measurement.

  • You can easily find out on display if existing earthing is sufficient or needs to be improved
  • For measurement it's necessary to install a measuring electrode 10 m from earthing. Use a well-guiding stainless steel rod at least 20 cm long. Connect with a high voltage cable to green connection of the energizer

Power switching 50% / 100%

  • Possibility of switching power in fencee Cloud application or on energizer with the ON / OFF button
  • Power switching saves energy and allows use for short fences where you don't need high performance
Power switching 50% / 100%
Modern smart farm under control

Modern smart farm under control

Connect energizer to the Cloud and control the device using a mobile phone via the fencee Cloud application from anywhere in the world.

Connection with FENCE GATEWAY

You can connect RF energizers to the control Gateway. This gives you an instant overview of all connected energizers from one place. 

With the FENCE WiFi GATEWAY GW100 you can connect energizers to the fencee Cloud and control them remotely from virtually anywhere in the world.

  • Control up to 12 energizers
  • Alarm functions
  • Current information

Get an overview of:

  • Energizer power and condition
  • Signal quality
  • The last measured voltage on the fence
  • Battery status
  • Set alarms
Connection with FENCE GATEWAY
Practical tips for installing device with an antenna

Practical tips for installing device with an antenna

Good signal is needed for a quality connection.

  • Good RF signal propagation benefits from placing the antennas as high above the ground as possible

Learn more about installing a device with an antenna. You will find practical advice in our leaflet


You hereby grant the consent of VNT electronics sro, with its registered office at Dvorská 605, 563 01 Lanškroun, IČ: 64793826, entered in the public register kept at the Regional Court in Hradec Králové, Section C, Insert 9839 (hereinafter the “Administrator”), No. 101/2000 Coll., on the protection of personal data (hereinafter referred to as the “Personal Data Protection Act”) processed the following personal data: name and surname e-mail any other information that you write in the forms on this website or in the emails sent to the addresses listed on this website The above personal data must be processed in order to prepare an offer or contract, process an order or send a price list. These data will be processed by the Administrator for a period of 1 year.